See how I rhymed that title?
For the longest time now, I've had this Blackhawk SERPA holster lying around not getting any use. Reason being: I only had a belt paddle for it but don't like having it on my belt. I prefer running a thigh rig for my sidearm during games. I recently came upon an opportunity to do a little tradesies with my brother Todd for one of his thigh platforms in exchange for an item or two I had in my possession. The only problem was that he did not have the screws to mount the holster onto the thigh platform.
At first I thought the screws I had for the belt paddle would work, but they were too short, as it were. Since I am very impatient and didn't want to have to try & track some official Blackhawk SERPA replacement screws down online, pay what would probably be more money than necessary, plus shipping, then have to wait for the screws to arrive, I just ran down the street to my local hardware store to see if they might have some screws that would work just as well.
Check the rest of this story after the jump...
Turns out, I was kinda right. I only brought the holster with me to see if they had screws that would fit, but not the thigh platform, so I ended up buying a few screws that were the correct diameter, but not the correct length. In fact, I'll admit, I did a terrible job estimating the correct length. Total fail. I didn't sweat it though, since the screws were made of brass and I figured would be relatively easy to cut with my Dremel rotary tool.
So I took a measurement or two on how much I needed to cut and then proceeded to do so.
For those of you curious as to what size screws will work, in terms of the diameter, I took the liberty of documenting the measurements I took. I would have just told you what was written on their packaging from the store, but I accidentally threw it away before I wrote it down. This measurements should get you plenty close enough to work. Here is the diameter in Inches.
And here it is in millimeters.
You will need a screw/bolt (same thing, essentially) with a head at least 7.74mm in diameter. I wouldn't go any less. This screws were cutting it a little closer than I'd prefer. You could also use washers to circumvent this issue as well.
Here is that same measurement in Inches.
So once I got things cut to the proper length, they fit just lovely. Here is a shot of the back of the thigh platform. The holster is mounted on the other side.
So there is the holster, mounted to the thigh platform. There should NOT be a gap between the holster and the thigh platform, nor should the holster have any real room to wiggle. If so, your screws are probably too long. Either cut them down a bit or add some washers to secure the holster more firmly.
|AIRSOFT JOB OPPORTUNITY ALERT: Pyramyd Air is looking for enthusiastic individuals who have a good knowledge of Airsoft products to help them assist their customers while shopping at www.PyramydAir.com. You'll get paid to talk about Airsoft stuff AND you can do it from the comforts of your own home! Click the following link to register with Needle and get all the details. https://pincushion.needle.com/needlers/register/pyramydair|| |
Speaking of Facebook, check out our new Facebook page for Pyramyd Airsoft and get in on a chance EVERY WEEK to WIN FIFTY BUCKS ($50) or check out our Pyramyd Airsoft YouTube Channel for a ton of great Airsoft video reviews, unboxing videos and actual Airsoft gun performance tests.